|
Pre-Inked Insert for Spin 'N Stamp - Impression Dimensions: 1/2" x 1-5/8" |
This size is great for small return addresses. This is a single insert for your Spin 'N Stamp. This stamp case can hold 3 of these inserts. Great for offices with mulitple locations. The laser engraved rubber makes this stamp strong and durable for years of use. Makes approximately 50,000 impressions before re-inking is needed. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
Re-Inking Instructions: Flip complete stamp over and slide the impression cartridge out of the handle and place 3 to 4 drops of ink into each of the openings of the cartridge.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Multiple Address Locations
Multiple Names or Phrases
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $20.95 $14.67 | Customize Details$20.95 $14.67 |
|
Small XpeDater - Impression Dimensions: 11/16" Diameter |
This laser engraved rubber stamp is strong and durable for years of use. This 6-Year stamp makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
To Adjust the Date Level: Pull top cap off. There will be a turn dial. Turn that dial left or right to either bring down the date lower or to raise the date higher.
To Set the Date: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date or text.
Re-inking Instructions: This stamp sits direct into a base. Remove the stamp from the base and add 3 to 4 drops of ink onto the base pad. If on the go and traveling with the pad cap place 1 to 2 drops direct into the pad cap.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Files
Documents
Anywhere a date is needed
|
Features:
6-Year Date Bands Beginning with Current Year
Xstamper (Oil-Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $64.85 $45.40 | Customize Details$64.85 $45.40 |
|
Small XpeDater - Impression Dimensions: 11/16" Diameter |
This laser engraved rubber stamp is strong and durable for years of use. This 6-Year date stamp makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
To Adjust the Date Level: Pull top cap off. There will be a turn dial Turn that dial left or right to either bring down the date lower or to raise the date higher.
To Set the Date: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date.
Re-inking Instructions: This stamp sits direct into a base. Remove the stamp from the base and add 3 to 4 drops of ink onto the base pad. If on the go and traveling with the pad cap place 1 to 2 drops direct into the pad cap.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Files
Documents
Anywhere a date is needed
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil-Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $64.85 $45.40 | Customize Details$64.85 $45.40 |
|
Small XpeDater - Impression Dimensions: 11/16" Diameter |
This laser engraved rubber stamp is strong and durable for years of use. This 6-year date band stamp makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
To Adjust the Date Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
To Set the Date: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date or text.
Re-inking Instructions: This stamp sits direct into a base. Remove the stamp from the base and add 3 to 4 drops of ink onto the base pad. If on the go and traveling with the pad cap place 1 to 2 drops direct into the pad cap.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Files
Documents
Anywhere a date is needed
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil-Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $64.85 $45.40 | Customize Details$64.85 $45.40 |
|
Small XpeDater - Impression Dimensions: 11/16" Diameter |
This laser engraved rubber stamp is strong and durable for years of use. Makes approximately This 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only.
To Adjust the Date Level: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date or text.
Re-inking Instructions: This stamp sits direct into a base. Remove the stamp from the base and add 3 to 4 drops of ink onto the base pad. If on the go and traveling with the pad cap place 1 to 2 drops direct into the pad cap.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Files
Documents
Anywhere a date is needed
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil-Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $64.85 $45.40 | Customize Details$64.85 $45.40 |
|
XpeDater Rotary Date Stamp - Impression Size: 1-3/16" |
The XpeDater prints your custom message along with the month, day and year. The 6-year band also prints A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and inked cap for travel use. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
To Adjust the Dater Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
To Change the Date: Twist open at the middle of the body of the stamp and spread apart. Turn the dials to the desired date.
Re-Inking Instructions: This stamp sits direct onto a stamp base. Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-Ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Files
Any Paperwork
|
Features:
6-Year Date Band Beginning with Current Year
Year Band also prints: A.M., P.M., REC'D, PAID, FAX'D
Warranty: For the Lifetime of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date Stamp - Impression Dimensions: 1-3/4" Diameter |
The XpeDater prints your custom message along with the month, day and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or count, and inked cap for travel use. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED.
To Adjust the Dater Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
Re-Inking Instructions: This stamp sits direct onto a stamp base. Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Files
Any Paperwork
|
Features:
6-Year Date Bands Beginning with Current Year
Xstamper (Oil Based) Ink
Year Bands Print: A.M., P.M., REC'D, PAID, FAX'D
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date Stamp - Impression Dimensions: 1-3/16" Diameter |
The XpeDater prints your custom message along with the month, day and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or count, and inked cap for travel use. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED.
To Adjust the Dater Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
Re-Inking Instructions: This stamp sits direct onto a stamp base. Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Files
Any Paperwork
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Year Bands Print: A.M., P.M., REC'D, PAID, FAX'D
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date Stamp - Impression Dimensions: 1-3/16" Diameter |
The XpeDater prints your custom message along with the month, day and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or count, and inked cap for travel use. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED.
To Adjust the Dater Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
Re-Inking Instructions: This stamp sits direct onto a stamp base. Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Files
Any Paperwork
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Year Bands Print: A.M., P.M., REC'D, PAID, FAX'D
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date Stamp - Impression Dimensions: 1-3/4" Diameter |
The XpeDater prints your custom message along with the month, day and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or count, and inked cap for travel use. Use Xstamper Refill Ink only. Use of any other ink will void out the warranty.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED.
To Adjust the Dater Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
Re-Inking Instructions: This stamp sits direct onto a stamp base. Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
Files
Any Paperwork
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Year Bands Print: A.M., P.M., REC'D, PAID, FAX'D
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpedDater Rotary Date & Time Stamp - Impression Dimensions: 1-3/16" |
The XpeDater prints your custom message along with the time, month, day and year. The 6-year band also prints: A.M., P.M., PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and has an inked cap for travel use.
To Adjust the Date Level: Pull top cap off. There will be a turn dial, turn that dial left or right to either bring down the date lower or to raise the date higher.
Re-Inking Instructions: This stamp sits direct onto a stamp base, Remove the stamp from it's base and place 3 to 4 drops of ink into your base.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Documents
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date & Time Stamp - Impression Dimensions: 1-3/16" Diameter |
Pre-inked rotary XpeDater date & time stamp prints your custom message along with the month, day, and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and an inked cap for travel use. Use Xstamper Refill Ink only to re-ink your dater.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED
To Adjust The Date Level: Remove the top cap and turn the dial to the desired height.
To Change The Date: Twist to open the body of the XpeDater and turn the dials to the desired date or text.
Re-Inking Instructions: This stamp sits direct into a stamp base. Remove the stamp from it's base and directly place 3-4 drops of ink into the base.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Any Document
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date & Time Stamp - Impression Dimensions: 1-3/16" Diameter |
Pre-inked rotary XpeDater date & time stamp prints your custom message along with the month, day, and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and an inked cap for travel use. Use Xstamper Refill Ink only to re-ink your dater.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED
To Adjust The Date Level: Remove the top cap and turn the dial to the desired height.
To Change The Date: Twist to open the body of the XpeDater and turn the dials to the desired date or text.
Re-Inking Instructions: This stamp sits direct into a stamp base. Remove the stamp from it's base and directly place 3-4 drops of ink into the base.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Any Document
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Warranty: Guaranteed for the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date & Time Stamp - Impression Dimensions: 1-3/16" Diameter |
Pre-inked rotary XpeDater date & time stamp prints your custom message along with the month, day, and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and an inked cap for travel use. Use Xstamper Refill Ink only to re-ink your dater.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED
To Adjust The Date Level: Remove the top cap and turn the dial to the desired height.
To Change The Date: Twist to open the body of the XpeDater and turn the dials to the desired date or text.
Re-Inking Instructions: This stamp sits direct into a stamp base. Remove the stamp from it's base and directly place 3-4 drops of ink into the base.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Any Document
|
Features:
6-Year Date Bands Beginning with Current Year
Xstamper (Oil Based) Ink
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
XpeDater Rotary Date & Time Stamp - Impression Dimensions: 1-3/16" Diameter |
Pre-inked rotary XpeDater date & time stamp prints your custom message along with the month, day, and year. The 6-year band also prints: A.M., P.M., REC'D, PAID, FAX'D. This XpeDater also comes with an inked base for a permanent place on a desk or counter, and an inked cap for travel use. Use Xstamper Refill Ink only to re-ink your dater.
*NOTE: WORDING ON SAMPLE IS NOT INCLUDED
To Adjust The Date Level: Remove the top cap and turn the dial to the desired height.
To Change The Date: Twist to open the body of the XpeDater and turn the dials to the desired date or text.
Re-Inking Instructions: This stamp sits direct into a stamp base. Remove the stamp from it's base and directly place 3-4 drops of ink into the base.
Recommendations: Re-ink your stamp pad overnight to allow the ink to fully absorb into the stamp pad.
|
Recommended Uses:
Any Document
|
Features:
6-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Warranty: For the Life of the Date Bands
|
|
| $95.95 $67.17 | Add to Cart Details$95.95 $67.17 |
|
Pre-Inked VersaDater Impresion Dimension: 1-3/4" x 2-1/2" |
This custom VersaDater is the only date stamp you will ever need. On it's own the VersaDater is an 8-year date stamp. The date is easily changed with a turn of the dial. Snap on the pre-inked impression frame and you now have created a whole new message date stamp. This stamp prints the month, day and year along with your copy. Use Xstamper Refill Ink only. Use of any other ink will void out any warranty.
Recommendations: Re-ink your stamp pads overnight to allow the ink to fully absorb into the stamp pad. We also recommend to use Xstamper "Ink Cartridges" it creates less to no mess.
Re-Inking Instructions:
VersaDater - Remove the dater from the impression frame (pull the dater straight out of the impression frame thereby exposing your dates). Turn your dater to either the left or the right side you will see an inkwell hole that says "INK" that is where you will place the neck of the Refill Ink Cartridge and squeeze the ink into the inkwell hole.
Impression Frame - Remove the dater from the impression frame and slide the impression cartridge out and add 3 to 4 drops of ink into the opening of the pad cartridge.
|
Features:
8-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Impression Frame - "Lifetime Warranty"
VersaDater - Warranty for the Life of the Year Bands
|
Recommended Uses:
Any Document Requiring a Date and/or Message
|
|
| $101.60 $71.12 | Customize Details$101.60 $71.12 |
|
Pre-Inked VersaDater (Frame Only) - Impression Size: 1-3/4" x 2-1/2" |
This impression frame is made for the Xstamper VersaDater. Great for offices, schools, law offices and medical offices. The laser engraved rubber is strong and durable for years of use. Makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only to re-ink your stamp.
*Note: The N81 is a frame only. The dater is not included. If you would like the full stamp, including the custom text and date, please select the N80 stamp.
Re-Inking Instructions: While covered with the cap, remove the dater from the impression frame. Uncap and slide the cartidge pad out. Place 3 to 4 drops of Xstamper Refill Ink into each opening of the cartridge pad.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Frame Works With:
52111 (Red) VersaDater
52112 (Black) VersaDater
52113 (Blue) VersaDater
52211 (Red) Julian VersaDater
52212 (Blue) Julian VersaDater
|
Features:
Xstamper (Oil Based) Ink
Twist Cap for Leakage Protection
Refillable
Lifetime Warranty
|
|
| $57.60 $40.32 | Customize Details$57.60 $40.32 |
|
Pre-Inked VersaDater Impresion Dimension: 1-5/16" x 2-1/8" |
This custom VersaDater is the only date stamp you will ever need. On it's own the VersaDater is an 8-year date stamp. The date is easily changed with a turn of the dial. Snap on the pre-inked impression frame and you now have created a whole new message date stamp. This stamp prints the month, day and year along with your copy. Use Xstamper Refill Ink only. Use of any other ink will void out any warranty.
Recommendations: Re-ink your stamp pads overnight to allow the ink to fully absorb into the stamp pad. We also recommend to use Xstamper "Ink Cartridges" it creates less to no mess.
Re-Inking Instructions:
VersaDater - Remove the dater from the impression frame (pull the dater straight out of the impression frame thereby exposing your dates). Turn your dater to either the left or the right side you will see an inkwell hole that says "INK" that is where you will place the neck of the Refill Ink Cartridge and squeeze the ink into the inkwell hole.
Impression Frame - Remove the dater from the impression frame and slide the impression cartridge out and add 3 to 4 drops of ink into the opening of the pad cartridge.
Would you like more information on your Versadater, including assembly instructions? Click here
|
Features:
8-Year Date Band Beginning with Current Year
Xstamper (Oil Based) Ink
Impression Frame - "Lifetime Warranty"
VersaDater - Warranty for the Life of the Year Bands
|
Recommended Uses:
Any Document Requiring a Date and/or Message
|
|
| $90.55 $63.39 | Customize Details$90.55 $63.39 |
|
Pre-Inked VersaDater (Frame Only) - Impression Size: 1-5/16" x 2-1/8" |
This impression frame is made for the Xstamper VersaDater. Great for offices, schools, law offices and medical offices. The laser engraved rubber is strong and durable for years of use. Makes approximately 50,000 impressions before needing to be re-inked. Use Xstamper Refill Ink only to re-ink your stamp.
*Note: The N83 is a frame only. The dater is not included. If you would like the full stamp, including the custom text and date, please select the N82 stamp.
Re-Inking Instructions: While covered with the cap, remove the dater from the impression frame. Uncap and slide the cartidge pad out. Place 3 to 4 drops of Xstamper Refill Ink into each opening of the cartridge pad.
Recommendations: Re-ink your stamp overnight to allow the ink to fully absorb into the stamp pad.
|
Frame Works With:
52111 (Red) VersaDater
52112 (Black) VersaDater
52113 (Blue) VersaDater
52211 (Red) Julian VersaDater
52212 (Blue) Julian VersaDater
|
Features:
Xstamper (Oil Based) Ink
Xstamper Lifetime Warranty
|
|
| $51.80 $36.26 | Customize Details$51.80 $36.26 |
|
Pre-Inked Julian VersaDater Impresion Dimension: 1-5/16" x 2-1/8" |
Xstamper custom Julian VersaDater is the only date stamp you will ever need. On it's own, the VersaDater is an 8-year dater that prints: DAY, MONTH, and YEAR. The date is easily changed with a turn of the dial. Snap on the cusom pre-inked impression frame and you have now created a whole new stamp. The laser engraved rubber is strong and durable for the full 8 years of use. Makes approximately 50,000 impression before needing to be re-inked Use Xstamper Refill Ink only. Use of any other ink will void out any warranty.
Recommendations: Re-ink your stamp pads overnight to allow the ink to fully absorb into the stamp pad. We also recommend to use Xstamper "Ink Cartridges" it creates less to no mess.
Re-Inking Instructions:
VersaDater - Remove the dater from the impression frame (pull the dater straight out of the impression frame thereby exposing your dates). Turn your dater to either the left or the right side you will see an inkwell hole that says "INK" that is where you will place the neck of the Refill Ink Cartridge and squeeze the ink into the inkwell hole.
Impression Frame - Remove the dater from the impression frame and slide the impression cartridge out and add 3 to 4 drops of ink into the opening of the pad cartridge.
Would you like more information on your Versadater, including assembly instructions? Click here
|
Features:
8-Year Date Bands Beginning with Current Year
Xstamper (Oil Based) Ink
Impression Frame - "Lifetime Warranty"
VersaDater - Warranty for the Life of the Year Bands
|
Recommended Uses:
Any Document Requiring a Date and/or Message
|
|
| $82.25 $57.58 | Customize Details$82.25 $57.58 |